• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a broken window handle is a easy task and with the right tools it can be done quite quickly. It's important to identify the kind of handle you have as well as the size of its spindle before purchasing a replacement.

Older uPVC windows feature cockspur window handles which have an extension spur that can lock over a cockspur wedge striker plate. They can be right or left-handed and have to match when replacing.

What kind of lock and handle do I have?

There are a variety of upvc window locks and handles each with their own advantages and purposes. The type of handle that you have will determine if the locking mechanism you have is effective and if it is easy to open the windows. With time and regular use, window handles made of upvc may become damaged or worn out, rendering them less secure and effective. In some cases they may even fall off completely. If you find that your window handles have been removed, it's essential to fix them as soon as you can. This will help stop potential burglaries and keep your home safe.

It's a task that almost anyone can do. With a few basic tools and the right knowledge it's a straightforward process that shouldn't take longer than a couple of minutes. You will need to know the type of handle or lock that you have on your window. This will allow you to choose the correct replacement.

Inline Espagnolette Handles

These are the most commonly used type of upvc handles and are usually placed on the outside of your window. They are flat and come with an opening that engages the locking mechanism of the window frame. Inline upvc handles also come with a spindle that goes through the middle of the handle, and into the window frame to operate the latch.

Cockspur Handles

These handles are typically located on older uPVC windows and feature an distinctive hook-shaped design. Cockspur handles have a single screw that holds the handle to the frame of the window and aren't as secure as other kinds of window handles.

Tilt and Window Handle Replacement Turn Handles

As opposed to the other upvc handles that are tilt and turn, these handles can be turned to open the windows and the handle can be tilted to the side for ventilation. They feature a 7mm spindle at the back and are available both in left and right-handed versions.

It is important to measure the spindle size when buying double glazing replacement windows upvc handle. Not all of them are exactly the same size. Drop something in the middle of the hole to measure the length. This is the largest spindle size that will fit your windows.

What is a spindle?

uPVC window handles operate in a similar way as doors. By turning the handle, you will be able to open a latch in the frame. The window is then opened and shut. But, at times, Window Handle Replacement the handles may become damaged, particularly when they are used frequently or exposed to harsh weather conditions. This could mean that you have to replace your uPVC windows handles as they might not operate the window in a proper manner for a long time.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed in a variety of ways to fit into uPVC frames. Each handle type uses an entirely different spindle for locking the window mechanism. This is why it is essential to know what kind of handle you have on your uPVC window so you can get the correct replacement for it.

The base section of the handle will inform the type of uPVC it is. There should be a "snap-in cover' over one screw that holds the handle base in the correct position. Once you remove this, you will be able see the second screw that holds the base of the handle in place. After both screws are removed you should be in a position to pull the handle away from the uPVC window.

Once you have removed the uPVC window handle, you have to remove the spindle you have removed from the locking mechanism. Note the length of the spindle. You will need to purchase a replacement with the same length as the handle that was originally used and locking device.

The spindle wears out and is unable to operate the locking mechanism. This could be due to corrosion, damage due to constant use or a loosening locking mechanism. If this occurs, it will be necessary to replace the window handle and locking mechanism to restore full functionality to your uPVC windows.

How do I get rid of the handle from the previous one?

Window handles can be damaged or broken over time. It is essential to fix them as quickly as possible to ensure your security. It is easy to replace a worn or damaged handle. The job can be completed in under one minute without the need for special tools.

The first step in removing the handle that was previously used is to take off the screw situated on the top of the handle base. Once the screw is removed, the handle can be pulled away. A second screw will be situated at the base of the handle. It can also be removed. After the two screws are removed, the handle will be removed from the window's base.

After removing the handle, align the fixing holes of the new handle to the holes that are already in the window frame. If there is a sticker or cap on the new handle, remove it if necessary and then screw the handle into the appropriate position. It is essential to ensure whether the handle functions after it is installed. Turn the handle and make sure that the lock mechanism is activated.

Espag handles have an elongated spindle that extends from the handle and slot into a multipoint locking mechanism in the window frame. Cadenza windows have a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over the frame's outer or the transom bar cross member within the window.

Once you have the new handle in place, slide the spindle into the window lock and then tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle is securely fixed. Now that the handle is ready for use, simply open and close the window a few times to make sure that it functions properly and securely.

How do I install the new handle?

Switching your uPVC window handle isn't a big deal and the process is actually very simple. All you require is a screwdriver, and a little bit of patience. The first thing to do is make sure that the handle you have previously used is locked and then remove any screws that are visible, you can replace them by screw caps if you need. After removing the handle and you are ready to take a note of the length of the spindle that extends from the back of the handle. This is vital as it will determine what type of handle you need to buy.

Espagnolette handles are the most common type of handle for uPVC windows. The spindle passes through the handle to activate the locking mechanism in the frame of the double glazing window replacement. The handle opens the latch, allowing the window to open. When used regularly and over time, espagnolette handles may become damaged.

Cadenza handles are a different kind of uPVC window handle commonly used on tilt and turn windows. They have a protruding knife that operates a multiple-point locking mechanism within the window. They are generally more secure than espagnolette handles as they can only be opened from the inside. They can be replaced using the same method as espagnolette handles but you should make sure that the new handle has an angled blade instead of one that is flat.

Once you've decided on the right handle to purchase You can simply align the new handle with the screw holes and then screw it into the appropriate position. Then, you should put the screws on and test your new handle. This is done by moving the handle from the locked position to the unlocked and vice versa several times. It may be worth contacting an expert to see how you can fix any problems. They can provide advice on how to resolve the problem in a timely and efficient way.